SYN 800 MHz +15dBm repeater
SYN 800 MHz +15dBm repeater
SYN 800 MHz +15dBm repeater
SYN Technologies

SYN 800 MHz +15dBm repeater

Article no.: SYN-L15L-S
Delivery time: Est. delivery 7d
SYN-L15L-S is a band-selective (10MHz width) 800 MHz repeater specially developed for Swedish requirements and wishes. This model is adapted for areas up to 2000m3. It is programmable so that the installer can change the center frequency. In addition, the possibility to configure... read more
7 539 kr

SYN-L15L-S is a band-selective (10MHz width) 800 MHz repeater specially developed for Swedish requirements and wishes.

This model is adapted for areas up to 2000m3. It is programmable so that the installer can change the center frequency. In addition, the possibility to configure a number of other parameters via the Touch Screen

SYN-L15L-S has a built-in "Uplink Sleep Mode" or so-called "Silent Mode" that protects the operator's base stations from noise/load when no one behind the repeater is speaking phone. That is, the repeater turns off the signal to the operator's base station when there is no traffic behind the repeater. This happens in milliseconds. This is a function that is usually only found in more powerful and significantly more expensive repeaters.

The repeater normally runs in a fully automatic mode that tests signal strengths and possible signal leakage between internal and external antennas during start-up to set up the repeater and alarm if it detects potential signal leakage that could result in looping.

The repeater also has automatic shutdown in case of excessive signal leakage or looping. Everything to prevent problems for you and the operators.

An LCD display shows signal strength in and out as well as amplification factor both in uplink and downlink as well as center frequencies in Uplink/Downlink.

Normally the repeater is run in auto mode. But if you need to manually set the gain, do it via the touch screen.

Regular antenna connectors (N-type) are screwed into the metal chassis to be able to connect even coarse cables.

Unique features of SYN-L15L-S

  • A real band-selective 800 MHz repeater (ie acceptable by the operators)
  • LCD Touch Display but setting of gain and Uplink /Downlink frequency
  • Uplink Sleep Mode - saves resources for the operator
  • High output power for several indoor antennas - 15 dBm
  • RED CE/3GPP tested and approved.
    • li>
  • Automatic gain adjustment
  • Built-in anti-round/self-oscillation protection
  • Automatic test procedure of antenna separation, signal strength and gain during start-up

Read more about repeaters, measurement of repeaters and permits for repeaters

How you e.g find out if you can use a repeater

Frequently asked questions about Repeaters and permissions for repeater

Our Swedish operators' frequency bands

Frequency band 10 MHz within 832 - 862 MHz / 791-821 MHz
Adjustable center frequency via Touch Display
Bandwidth 10 MHz
Mobile technology LTE
Output power Downlink 15 dBm / Uplink 15 dBm
Gain Downlink 70 dB / Uplink 70 dB
Automatic gain adjustment > 15 dB
Manual gain adjustment 31 dB in 1 dB increments
Chassis Metal chassis with built-in heatsink
3G antenna connection 2 pcs N-female
Power supply 240V AC, max 15 W
Size 150 x 210 x 36 mm
Weight 1.9 kg
Temperature -25 to +55 degrees
IP rating IP40 (indoor)

Write a review