Poynting Omnidirectional antenna 7dBi SMA with 8m cable

Article no.: OMNI-A0121
Availability: 1pcs - Hurry up

Data sheet

An omnidirectional true multiband antenna for 4G/3G/GSM with a gain of 2.4 - 7.0 dBi This is a very good quality semi-professional outdoor antenna with good gain over the entire frequency bands. The antenna contains several internal antenna elements to provide maximum amplific... read more

1 219 kr

button_wishlist

An omnidirectional true multiband antenna for 4G/3G/GSM with a gain of 2.4 - 7.0 dBi

This is a very good quality semi-professional outdoor antenna with good gain over the entire frequency bands. The antenna contains several internal antenna elements to provide maximum amplification on the 4G 2600 band.

It is primarily intended for mounting on a wall but can also be mounted on an antenna tube (tube clamp not included).

< p>For being an omnidirectional antenna, this model has high gain. This semi-professional model is really robust, weatherproof and has a large antenna area. About 50cm high and 3cm in diameter.

If you have a 3G USB adapter or pocket router with antenna input, use our converter cables with SMA connector.
Do you have a 3G router with an SMA connector, you can connect it directly to the antenna connector.
For other products, contact us and we can provide information on which converters may be needed for your product

If you need an antenna with even higher gain, we recommend Poynting directional antenna or Poynting directional panel type antenna.

8 meter cable included with SMA male.

Fits directly to 4G/3G routers that have SMA connectors (such as most routers from Sierra Wireless, Conel, Sarian, MultiTech and others) or all USB adapters if there is a converter cable with an SMA connector (e.g. Option, Sierra Wireless, Huawei).

Poynting Omnidirectional antenna 7dBi SMA 8m cable V3 OMNI-A0121

A 3G USB adapter or PC-Card is normally optimized to provide maximum reception regardless of location, therefore the reception is completely spherical . Placing an antenna outdoors often gives up to 10-15dB better signal strength than having a 3G adapter poorly placed indoors.

Advanced omnidirectional antennas provide additional amplification by flattening the reception sphere.

Directional antennas provide additional amplification by also directing reception in one direction.

Product sheet Poynting Omni-A0121 Version 3

Frekvensband	790-960 MHz 1700-2170 MHz 2500-2700 MHz
Förstärkning	2,4 dBi på 800-900 MHz (4G och GSM) 6,0 dBi på 1700-2170 MHz (4G och 3G)
Impedans	50 Ohm
Fäste	Väggfäste
Placering	Inomhus eller utomhus
Max uteffekt	10W
Antennsladd	8 meter
Kabelanslutning	SMA-hane
Storlek	50 x 4 x 4 cm

Frekvensband	790-960 MHz 1700-2170 MHz 2500-2700 MHz
Förstärkning	2,4 dBi på 800-900 MHz (4G och GSM) 6,0 dBi på 1700-2170 MHz (4G och 3G)
Impedans	50 Ohm
Fäste	Väggfäste
Placering	Inomhus eller utomhus
Max uteffekt	10W
Antennsladd	8 meter
Kabelanslutning	SMA-hane
Storlek	50 x 4 x 4 cm

Explanation of frequency bands

When choosing an antenna, pay attention to which frequency bands the antenna supports. Depending on which operator and where the antenna will be used, the frequency bands vary. Larger cities use 2600MHz while smaller towns use 800/900MHz with some support bands in between such as 1800/2100MHz.

A higher frequency band gives a higher speed but also has a shorter range. The same applies to the antenna, if you have a base station that transmits on 2600MHz, your antenna, antenna cable and the location of the antenna become more important than on a lower frequency band. Explanation of signal loss we will go through soon. Higher frequency bands also mean shorter range from the base station.

450MHz (coverage band) also known as the Net1 band is the frequency band that covers the most area in Sweden. Therefore, Net1 is known to be able to have reception where other operators don´t have a chance, but with low download and upload speeds. The reason why this band is called Net1 is because that the company Net1 has exclusive rights to this frequency band.

800MHz (coverage band) is used by all common operators, excluding Net1. The low frequency band means that 800MHz covers a lot of space. Therefore, the band is used outside big cities or smaller towns. 800MHz is the most used frequency band around Europe.

900MHz (coverage band) is the band that Tele2 and Telenor initially used as coverage band. 900MHz is a more unusual LTE band and in the beginning the band caused some problems when the clients (mobile phones etc.) could not connect to 900MHz. Today, the mobile phone manufacturers have adapted the mobile phones to be able to communicate on 900MHz.

1800MHz (capacity band) is the latest frequency band launched. All operators today use this band in metropolitan centers (apart from Net1).

2600MHz (capacity band) is a very well-used frequency band all over Europe. 2600MHz is the highest frequency band used for LTE, this means that the band also has the shortest range compared to 800/900MHz. Due to the high capacity, the band is used in metropolitan environments where many base stations are required to cover as much surface as possible and have as high a capacity as possible.

Frekvensplan 4G