Poynting Omnidirectional antenna 5G LTE MiMo 6dBi

Article no.: A-OMNI-0600-V1-02
Availability: 1pcs - Hurry up

2 359 kr

Poynting OMNI-600 is a unique new design with improved 4G/5G LTE 2×2 MIMO performance. As ultra-wide band, it covers all contemporary operating frequencies with excellent balanced gain. Higher frequencies are not compromised and the antenna design allows for superior pattern control making the OMNI-600 a true high performance omnidirectional antenna.

The antenna contains 2 antenna elements and double cable of 5m comes out of the antenna.

Poynting OMNI-600 is usable in all parts of the world and guarantees signal reception almost everywhere. The antenna is future-proof and covers from 450 MHz to 3.5 GHz CBRS band which is gaining popularity in different regions.

Frekvensband
410-470 MHz
690-960 MHz
1710-2700 MHz
3400-3800 MHz

Förstärkning
Max 6,2 dBi
0,75 dBi på 452-468 MHz
2 dBi på 790-960 MHz
6,2 dBi på 1710-2700 MHz
2,2 dBi på 3400-3800 MHz

Impedans
50 Ohm

Fäste
Väggfäste
Mastfäste

Placering
Inomhus eller utomhus (utomhus rekommenderas)

Max uteffekt
10W

Antennsladd
2st 5 meter HDF 195 Super Low Loss

Kabelanslutning
2st SMA-hane

Storlek
750 x 75mm

Vikt
750 gram

IP Klassning
IP65

Temperatur
-40 till +70 grader

Vindtålighet
160 km/h

Explanation of frequency bands

When choosing an antenna, pay attention to which frequency bands the antenna supports. Depending on which operator and where the antenna will be used, the frequency bands vary. Larger cities use 2600MHz while smaller towns use 800/900MHz with some support bands in between such as 1800/2100MHz.

A higher frequency band gives a higher speed but also has a shorter range. The same applies to the antenna, if you have a base station that transmits on 2600MHz, your antenna, antenna cable and the location of the antenna become more important than on a lower frequency band. Explanation of signal loss we will go through soon. Higher frequency bands also mean shorter range from the base station.

450MHz (coverage band) also known as the Net1 band is the frequency band that covers the most area in Sweden. Therefore, Net1 is known to be able to have reception where other operators don´t have a chance, but with low download and upload speeds. The reason why this band is called Net1 is because that the company Net1 has exclusive rights to this frequency band.

800MHz (coverage band) is used by all common operators, excluding Net1. The low frequency band means that 800MHz covers a lot of space. Therefore, the band is used outside big cities or smaller towns. 800MHz is the most used frequency band around Europe.

900MHz (coverage band) is the band that Tele2 and Telenor initially used as coverage band. 900MHz is a more unusual LTE band and in the beginning the band caused some problems when the clients (mobile phones etc.) could not connect to 900MHz. Today, the mobile phone manufacturers have adapted the mobile phones to be able to communicate on 900MHz.

1800MHz (capacity band) is the latest frequency band launched. All operators today use this band in metropolitan centers (apart from Net1).

2600MHz (capacity band) is a very well-used frequency band all over Europe. 2600MHz is the highest frequency band used for LTE, this means that the band also has the shortest range compared to 800/900MHz. Due to the high capacity, the band is used in metropolitan environments where many base stations are required to cover as much surface as possible and have as high a capacity as possible.

Frekvensplan 4G