Poynting Broadband 5G LTE 2x2 MIMO 3 dBi ePoynt

Article no.: A-EPNT-0004-V1-15
Delivery time: Est. delivery 7d

The Poynting ePoynt-4 omnidirectional antenna is designed to house a router and turns the antenna enclosure into a Customer Premises Equipment (CPE). Just mount your own compatible LTE/5G router (max size 140x120x50mm). EPNT-4 offers a variety of antennas in the same shell, 5G... read more

3,199 kr

Add to Wish List

EPNT-4 offers a variety of antennas in the same shell, 5G/LTE 2x2 MIMO, WiFi 2x2MIMO and GPS.

The cellular 5G/LTE antennas are broadband and operate from 617 to 4200 MHz with excellent gain across all frequencies. While the Wi-Fi antennas cover 2.4 GHz and 5 to 7.2 GHz with a maximum gain of 5 dBi. In addition, the antenna elements are cross-polarized which further improves the overall performance of the antenna.

The antenna is salt water protected and UV stabilized so it can be used in highly corrosive, chemical and toxic environments. The enclosure also offers a robust mechanical design to withstand adverse weather conditions, making it vandal and weather resistant with IP67 and IK10 ratings.

Note that the router used must have a wide operating temperature range when placed in harsh environments.< /p>

Power supply of router via PoE is preferred.

Features

Combined enclosure for router and with high performance antenna
New advanced metamaterial technology
Exceptional performance with high gain over the main 4G/5G bands
Built-in 2×2 MIMO dual-band 2.4GHz and 5 more 7.2 GHz Wi-Fi antenna
Cross-polarized antennas for improved performance
Weather, dust and vandal-resistant housing (IP67, IK10)

< p>Applications

Outdoor fixed wireless access antenna (FWA)
LTE Internet connection for consumers
Industrial and commercial LTE expansion
Mobile internet to Wi-Fi distrib ution for marine/boats
Improving urban and rural household reception
LTE data deployment in agriculture

Product sheet PDF (English)

< a href="https://www.communica.se/antenner/User%20Guide-UG-A-EPNT-0004-V1-01.pdf" target="_blank">Manual PDF (English)< /p>

< td>50 Ohm < td>2400-2500 MHz < tr> < td>Weight < tr>

Frequency band	617-960 MHz
	1427-1517 MHz
	1710-2700 MHz
	3400-4200 MHz
Gain	Max 3 dBi
	1 dBi, 617-960 MHz
	2 dBi, 1427-1517 MHz
	3 dBi, 1710-2700 MHz
	0 dBi, 3400-4200 MHz
Max output power	10W
Impedance
Polarization	±45°
Frequency band WiFi
	5000-7200 MHz
Boost WiFi	2.2 dBi, 2400-2500 MHz
	5 dBi, 5000-7200 MHz
Cable connection	Cell 2 pcs SMA male, angled
	Wi-Fi 2 pcs SMA male, angled. See accessories for adapter RP-SMA
Cable length	15 cm
Size	351 x 238 x 182 mm
Max router size	140 x 120 x 50 mm
1.7 kg
Wind resistance	<220 km/h
Temperature	-40°C to +80°C
IP rating	IP67, IK10< /td>
Mounting	Wall and mast mount. Can also be placed on the wall (see accessories).

Explanation of frequency bands

When choosing an antenna, pay attention to which frequency bands the antenna supports. Depending on which operator and where the antenna will be used, the frequency bands vary. Larger cities use 2600MHz while smaller towns use 800/900MHz with some support bands in between such as 1800/2100MHz.

A higher frequency band gives a higher speed but also has a shorter range. The same applies to the antenna, if you have a base station that transmits on 2600MHz, your antenna, antenna cable and the location of the antenna become more important than on a lower frequency band. Explanation of signal loss we will go through soon. Higher frequency bands also mean shorter range from the base station.

450MHz (coverage band) also known as the Net1 band is the frequency band that covers the most area in Sweden. Therefore, Net1 is known to be able to have reception where other operators don´t have a chance, but with low download and upload speeds. The reason why this band is called Net1 is because that the company Net1 has exclusive rights to this frequency band.

800MHz (coverage band) is used by all common operators, excluding Net1. The low frequency band means that 800MHz covers a lot of space. Therefore, the band is used outside big cities or smaller towns. 800MHz is the most used frequency band around Europe.

900MHz (coverage band) is the band that Tele2 and Telenor initially used as coverage band. 900MHz is a more unusual LTE band and in the beginning the band caused some problems when the clients (mobile phones etc.) could not connect to 900MHz. Today, the mobile phone manufacturers have adapted the mobile phones to be able to communicate on 900MHz.

1800MHz (capacity band) is the latest frequency band launched. All operators today use this band in metropolitan centers (apart from Net1).

2600MHz (capacity band) is a very well-used frequency band all over Europe. 2600MHz is the highest frequency band used for LTE, this means that the band also has the shortest range compared to 800/900MHz. Due to the high capacity, the band is used in metropolitan environments where many base stations are required to cover as much surface as possible and have as high a capacity as possible.

Frekvensplan 4G