Proscan

Magnetic base antenna 6dBi for Huawei 3G/4G modem, CRC9

     2 reviews  |  Write a review
Article no.: 5171
Availability: 18st
Magnetic base antenna 6dBi with Huawei connector A good antenna with 6dBi amplification that is easy to place on e.g. a windowpane. With 3m cable and a CRC9 connector Fits the following modems and data cards: < td>Huawei K3520 Huawei E3372 Huawei E169g... read more
129 kr
Quantity discount Unit price Incl Tax You save
2 or more 116 kr 26:-
4 or more 110 kr 76:-

Magnetic base antenna 6dBi with Huawei connector

A good antenna with 6dBi amplification that is easy to place on e.g. a windowpane. With 3m cable and a CRC9 connector

Fits the following modems and data cards:

< td>Huawei K3520

Huawei E3372 Huawei E169g Huawei E618 Huawei E1820
Huawei E3276 Huawei E176 Huawei E620 Huawei E156
Huawei E156G Huawei E182 Huawei E621 Huawei EC321
Huawei E160 Huawei E182e Huawei E630
Huawei E160E Huawei E230 Huawei E660 Huawei UMG181
Huawei E160G Huawei E367 Huawei E881E Huawei UMG1691
Huawei E161 Huawei E600 Huawei E1612 Huawei E122
Huawei E166< /td> Huawei E612 Huawei E1762 ZTE MF680
Huawei E169 Huawei E613 Huawei E176G  

O bs! This antenna works well together with Huawei's new 4G modems E3276 and E3372.

The antenna is 290mm long including magnetic base.

Frequency range 900/1800/1900/2100 MHz
Gain 6 dBi
Impedance 50 Ohm
VSWR 1.5:1
Cable RG174U 2.9m
Magnetic foot 29.7mm

Frequency bands

When choosing an antenna, pay attention to which frequency bands the antenna supports.
The following frequencies are used today in mobile broadband:

  • 450 MHZ - Net1 (CDMA450) not compatible with GSM, 3G-UMTS or 4G-LTE
  • 800 MHz - 4G/LTE outside the big cities. Provides long range.
  • 900 MHz - Primarily 2G/GSM but expansion is underway for 3G and 4G. Provides long range.
  • 1800 MHz - 2G/GSM. In the future (2013-2014) expansion of 4G on this band will occur
  • 2170 MHz - 3G in all of Sweden normally up to 3 km range.
  • 2600 MHz - 4G/LTE in Large cities /City. Extremely short range. Often less than 500m.

Write a review

Explanation of frequency bands

When choosing an antenna, pay attention to which frequency bands the antenna supports. Depending on which operator and where the antenna will be used, the frequency bands vary. Larger cities use 2600MHz while smaller towns use 800/900MHz with some support bands in between such as 1800/2100MHz.

A higher frequency band gives a higher speed but also has a shorter range. The same applies to the antenna, if you have a base station that transmits on 2600MHz, your antenna, antenna cable and the location of the antenna become more important than on a lower frequency band. Explanation of signal loss we will go through soon. Higher frequency bands also mean shorter range from the base station.

450MHz (coverage band) also known as the Net1 band is the frequency band that covers the most area in Sweden. Therefore, Net1 is known to be able to have reception where other operators don´t have a chance, but with low download and upload speeds. The reason why this band is called Net1 is because that the company Net1 has exclusive rights to this frequency band.

800MHz (coverage band) is used by all common operators, excluding Net1. The low frequency band means that 800MHz covers a lot of space. Therefore, the band is used outside big cities or smaller towns. 800MHz is the most used frequency band around Europe.

900MHz (coverage band) is the band that Tele2 and Telenor initially used as coverage band. 900MHz is a more unusual LTE band and in the beginning the band caused some problems when the clients (mobile phones etc.) could not connect to 900MHz. Today, the mobile phone manufacturers have adapted the mobile phones to be able to communicate on 900MHz.

1800MHz (capacity band) is the latest frequency band launched. All operators today use this band in metropolitan centers (apart from Net1).

2600MHz (capacity band) is a very well-used frequency band all over Europe. 2600MHz is the highest frequency band used for LTE, this means that the band also has the shortest range compared to 800/900MHz. Due to the high capacity, the band is used in metropolitan environments where many base stations are required to cover as much surface as possible and have as high a capacity as possible.

Frekvensplan 4G

Frequency band Net1 Tele2 Telia Telenor Tre
450MHz (Band 31)
800MHz (Band 20)
900MHz (Band 8)
1800MHz (Band 3)
2600MHz (Band 38)