Poynting PUCK-5 5G LTE MIMO WiFi GPS 6dBi White

Article no.: A-PUCK-0005-V1-01-W
Availability: 3pcs - Hurry up

1 519 kr

Poynting PUCK is a new model that offers a small profile antenna for use in several different areas such as IoT/M2M, Smart Meter, Smart Utilities, Marine and Transport. This is an antenna that offers a variety of options for MIMO LTE, MIMO WiFi and GPS/GLONASS within the same shell. While the installation is as simple as possible with many mounting options. Thanks to the advanced construction and robust design, this antenna provides very good performance in relation to its size and price.

The flagship of this model is a 5-in-1 antenna that has 2×2 MIMO LTE, 2 ×2 MIMO WiFi (Dual Band 2.4GHz and 5GHz) and GPS/GLONASS. While other variants offer a variety of configurations adapted to different needs. The PUCK range also includes a pure 4×4 WiFi and a GPS/GLONASS variant.

The cellular antennas (for 2G/3G/4G and 5G) cover the frequencies 698MHz to 3800MHz which include the most popular international LTE bands. Models with WiFi provide two separate dual-band elements providing simultaneous 2.4 GHz and 5 GHz on each antenna, with support for 802.11n, 802.11ac and the new 802.11ax with 2×2 MIMO.

Poynting PUCK is certified E-Mark, independent of ground plane, classified to IP68 and withstands temperatures between -40°C and +80°C.

The antenna is delivered with the following mounting options:

Vertical and horizontal mast mount
Mounting plate for surface mounting
Threaded grommet
Magnetic mount
Wall mount

Product sheet PDF (English )

Teknisk specifikation
Frekvensband	690-960 MHz
	1710-2700 MHz
	3200-3800 MHz
Förstärkning	Max 6 dBi över alla frekvenser
Frekvensband WiFi	2300-2500 GHz
	5000-6000 GHz
Förstärkning WiFi	5dBi (2.4GHz), 7,5dBi (5GHz)
Frekvensband GPS	1575,42/1600 MHz
Förstärkning GPS	Max 21 dBi
GPS-standard	GPS/Glonass
Anslutningar	Cellular/Mobil 2 st SMA-hane
	WiFi 2 st SMA-hane (RP-SMA-adapter medföljer)
	GPS 1 st SMA-hane
Kabellängd	2 meter
Jordplan	Inbyggt
Vindtålighet	<220 km/h
IP-klassning	IP68
Temperatur	-40°C till +80°C
Storlek	100 x 36 mm
Vikt	520 gram
Fäste	Genomföring, diameter 20 mm, längd 80 mm
	Vertikalt och horisontellt mastfäste
	Fästplatta för ytmontage
	Magnetfäste
	Väggfäste
Certifieringar	CE, EN, CSA, RoHS och IEC standard, E-mark

Teknisk specifikation
Frekvensband	690-960 MHz
	1710-2700 MHz
	3200-3800 MHz
Förstärkning	Max 6 dBi över alla frekvenser
Frekvensband WiFi	2300-2500 GHz
	5000-6000 GHz
Förstärkning WiFi	5dBi (2.4GHz), 7,5dBi (5GHz)
Frekvensband GPS	1575,42/1600 MHz
Förstärkning GPS	Max 21 dBi
GPS-standard	GPS/Glonass
Anslutningar	Cellular/Mobil 2 st SMA-hane
	WiFi 2 st SMA-hane (RP-SMA-adapter medföljer)
	GPS 1 st SMA-hane
Kabellängd	2 meter
Jordplan	Inbyggt
Vindtålighet	<220 km/h
IP-klassning	IP68
Temperatur	-40°C till +80°C
Storlek	100 x 36 mm
Vikt	520 gram
Fäste	Genomföring, diameter 20 mm, längd 80 mm
	Vertikalt och horisontellt mastfäste
	Fästplatta för ytmontage
	Magnetfäste
	Väggfäste
Certifieringar	CE, EN, CSA, RoHS och IEC standard, E-mark

Explanation of frequency bands

When choosing an antenna, pay attention to which frequency bands the antenna supports. Depending on which operator and where the antenna will be used, the frequency bands vary. Larger cities use 2600MHz while smaller towns use 800/900MHz with some support bands in between such as 1800/2100MHz.

A higher frequency band gives a higher speed but also has a shorter range. The same applies to the antenna, if you have a base station that transmits on 2600MHz, your antenna, antenna cable and the location of the antenna become more important than on a lower frequency band. Explanation of signal loss we will go through soon. Higher frequency bands also mean shorter range from the base station.

450MHz (coverage band) also known as the Net1 band is the frequency band that covers the most area in Sweden. Therefore, Net1 is known to be able to have reception where other operators don´t have a chance, but with low download and upload speeds. The reason why this band is called Net1 is because that the company Net1 has exclusive rights to this frequency band.

800MHz (coverage band) is used by all common operators, excluding Net1. The low frequency band means that 800MHz covers a lot of space. Therefore, the band is used outside big cities or smaller towns. 800MHz is the most used frequency band around Europe.

900MHz (coverage band) is the band that Tele2 and Telenor initially used as coverage band. 900MHz is a more unusual LTE band and in the beginning the band caused some problems when the clients (mobile phones etc.) could not connect to 900MHz. Today, the mobile phone manufacturers have adapted the mobile phones to be able to communicate on 900MHz.

1800MHz (capacity band) is the latest frequency band launched. All operators today use this band in metropolitan centers (apart from Net1).

2600MHz (capacity band) is a very well-used frequency band all over Europe. 2600MHz is the highest frequency band used for LTE, this means that the band also has the shortest range compared to 800/900MHz. Due to the high capacity, the band is used in metropolitan environments where many base stations are required to cover as much surface as possible and have as high a capacity as possible.

Frekvensplan 4G