Poynting MIMO-4 5G LTE WiFi GPS Black

Article no.: A-MIMO-0004-V1-15-B
Delivery time: Est. delivery 7d

The Poynting MIMO-4-15 is a 5-in-1 high-performance multi-frequency antenna. It supports two cellular, two Wi-Fi and one GPS/GLONASS antenna elements. The two cellular MIMO antennas offer coverage from 617 to 6000 MHz and handle all current bands for LTE/4G and 5G. That per... read more

2 539 kr

button_wishlist

The Poynting MIMO-4-15 is a 5-in-1 high-performance multi-frequency antenna.

It supports two cellular, two Wi-Fi and one GPS/GLONASS antenna elements.

The two cellular MIMO antennas offer coverage from 617 to 6000 MHz and handle all current bands for LTE/4G and 5G. That performance allows it to be used for different operators and is ready for future technologies up to 6 GHz for 5G and Wi-Fi applications from 5 to 6 GHz. The antenna also has two Wi-Fi elements that provide simultaneous support for 2.4 GHz and 5-7.2 GHz (2×2 MIMO).

MIMO-4-15 outperforms most competitors due to the way the high-performance antenna is designed. The radiation patterns of all elements provide an excellent balance, which is an important criterion for the transport and marine sectors, for which the antenna was developed.

Primary areas of use are commercial/industrial vehicles, M2M and IoT systems and marine applications where all use a wide range of radio technologies.

5-in-1 high-performance vehicle antenna
Ultra-broadband coverage from 617 to 6000 MHz
2x2 MIMO LTE/5G, 2x2 MIMO Wi-Fi and GPS/GLONASS
Robust and weatherproof antenna with IP69K rating
Ideal for transport and marine deployment
Multiple mounting options for easy installation

Frequency band 617-960 MHz

1427-1517 MHz

1710-2700 MHz

3400-4200 MHz

5000-6000 MHz
Gain -0.1 dBi at 617-960 MHz

3.5 dBi at 1427-1517 MHz

5.5 dBi at 1710-2700 MHz

5.5 dBi at 3400-4200 MHz

6 dBi at 5000-6000 MHz

Max 6 dBi
Frequency band WiFi 2400-2500 MHz

5000-7200 MHz
Gain WiFi 5 dBi at 2400-2500 MHz

6.5 dBi at 5000-7200 MHz
Frequency band GPS 1575.42-1600MHz
Amplification GPS 21+/-2dBi
Impedance 50 Ohm
Cable connection Cellular 2 pcs SMA male

WiFi 2 pcs SMA male (adapter RP-SMA included)

GPS 1st SMA male
Cable length 2 meters
Assembly Ø25 threaded bushing with foam plate for sealing.
IP Rating IP69K
Wind resistance 220 km/h
Temperature -40°C to +80°C
Size 160 x 65 mm
Weight 1360 grams
Bracket Magnetic bracket is available as an accessory

Explanation of frequency bands

When choosing an antenna, pay attention to which frequency bands the antenna supports. Depending on which operator and where the antenna will be used, the frequency bands vary. Larger cities use 2600MHz while smaller towns use 800/900MHz with some support bands in between such as 1800/2100MHz.

A higher frequency band gives a higher speed but also has a shorter range. The same applies to the antenna, if you have a base station that transmits on 2600MHz, your antenna, antenna cable and the location of the antenna become more important than on a lower frequency band. Explanation of signal loss we will go through soon. Higher frequency bands also mean shorter range from the base station.

450MHz (coverage band) also known as the Net1 band is the frequency band that covers the most area in Sweden. Therefore, Net1 is known to be able to have reception where other operators don´t have a chance, but with low download and upload speeds. The reason why this band is called Net1 is because that the company Net1 has exclusive rights to this frequency band.

800MHz (coverage band) is used by all common operators, excluding Net1. The low frequency band means that 800MHz covers a lot of space. Therefore, the band is used outside big cities or smaller towns. 800MHz is the most used frequency band around Europe.

900MHz (coverage band) is the band that Tele2 and Telenor initially used as coverage band. 900MHz is a more unusual LTE band and in the beginning the band caused some problems when the clients (mobile phones etc.) could not connect to 900MHz. Today, the mobile phone manufacturers have adapted the mobile phones to be able to communicate on 900MHz.

1800MHz (capacity band) is the latest frequency band launched. All operators today use this band in metropolitan centers (apart from Net1).

2600MHz (capacity band) is a very well-used frequency band all over Europe. 2600MHz is the highest frequency band used for LTE, this means that the band also has the shortest range compared to 800/900MHz. Due to the high capacity, the band is used in metropolitan environments where many base stations are required to cover as much surface as possible and have as high a capacity as possible.

Frekvensplan 4G