Panorama vehicle antenna 4x4 MIMO 5G/4G 2x2 WiFi GPS White

Article no.: GPSD4W-6-60-D
Delivery time: Back order item

Panorama GPSD4-6-60-D is an advanced multiband vehicle antenna with 4 built-in antenna elements for 4x4 MiMo 5G/4G, 617-6000MHz, 2x2 WiFi, GPS and connection to external rod antenna. With cable length 30 cm, connection SMA and FME. The antenna has been designed to provide 4... read more

3 089 kr

button_wishlist

Panorama GPSD4-6-60-D is an advanced multiband vehicle antenna with 4 built-in antenna elements for 4x4 MiMo 5G/4G, 617-6000MHz, 2x2 WiFi, GPS and connection to external rod antenna.

With cable length 30 cm, connection SMA and FME.

The antenna has been designed to provide 4x4 4G/5G MiMo performance from 617-960/1427-6000MHz in a robust low profile.

The flexible platform includes a number of different models with a second function, including GPS/GNSS and up to 6x6 MiMo WiFi 2.4/5.0GHz as well as rod antenna for UHF/VHF and TETRA etc.

Frequency band 617-960 MHz

1427-6000 MHz
Gain 5 dBi at 617-960 MHz

8 dBi at 1427-4200 MHz

9 dBi at 4900-6000 MHz
Frequency band WiFi 2400-2500 MHz

4900-7200 MHz
Amplification WiFi 7 dBi, 2400-2500 MHz

11 dBi, 4900-7200 MHz
GPS GPS/GNSS
Frequency band GPS 1562-1612 MHz
Amplification GPS 26dB
Connections Cell 4 x SMA male

WiFi 2 x SMA female

GPS 1 x FME female

Whip 1 x FME male
Cable length 30 cm
Ground plan Built-in
Bracket Pass-through 18 mm in diameter
Seal Double-adhesive foam pad
IP rating IP69K
Temperature -40°C to +80°C
Size 253 x 142 x 82 mm

Explanation of frequency bands

When choosing an antenna, pay attention to which frequency bands the antenna supports. Depending on which operator and where the antenna will be used, the frequency bands vary. Larger cities use 2600MHz while smaller towns use 800/900MHz with some support bands in between such as 1800/2100MHz.

A higher frequency band gives a higher speed but also has a shorter range. The same applies to the antenna, if you have a base station that transmits on 2600MHz, your antenna, antenna cable and the location of the antenna become more important than on a lower frequency band. Explanation of signal loss we will go through soon. Higher frequency bands also mean shorter range from the base station.

450MHz (coverage band) also known as the Net1 band is the frequency band that covers the most area in Sweden. Therefore, Net1 is known to be able to have reception where other operators don´t have a chance, but with low download and upload speeds. The reason why this band is called Net1 is because that the company Net1 has exclusive rights to this frequency band.

800MHz (coverage band) is used by all common operators, excluding Net1. The low frequency band means that 800MHz covers a lot of space. Therefore, the band is used outside big cities or smaller towns. 800MHz is the most used frequency band around Europe.

900MHz (coverage band) is the band that Tele2 and Telenor initially used as coverage band. 900MHz is a more unusual LTE band and in the beginning the band caused some problems when the clients (mobile phones etc.) could not connect to 900MHz. Today, the mobile phone manufacturers have adapted the mobile phones to be able to communicate on 900MHz.

1800MHz (capacity band) is the latest frequency band launched. All operators today use this band in metropolitan centers (apart from Net1).

2600MHz (capacity band) is a very well-used frequency band all over Europe. 2600MHz is the highest frequency band used for LTE, this means that the band also has the shortest range compared to 800/900MHz. Due to the high capacity, the band is used in metropolitan environments where many base stations are required to cover as much surface as possible and have as high a capacity as possible.

Frekvensplan 4G