- Your shopping cart is empty!
Milesight EM300-ZLD LoRaWAN leak detector cable
Delivery time: Unconfirmed
Milesight EM300-ZLD is a LoRaWAN device with a leakage sensor in a 3 meter sensor cable. Lay out the cable where you want to check for leakage and if any part of the cable gets wet (5 mm of water), an alarm is triggered.
In addition, temperature and humidity are monitored.
EM300 series is fully waterproof (IP67) and made for indoor or outdoor placement in temperatures from -30 to +70 degrees.
The device is super easy to install and maintain as it comes with a Li-SOCL battery that lasts 5 years ( at 10 minute intervals).
The device also has a free space for an additional Li-SOCL battery which gives up to 10 years of operating time.
EM300 is screwed up (outdoors/indoors) but can also be attached with a 3M adhesive plate (indoors).
The connection to the Milesight LoRaWAN gateway and IoT Cloud is completely automatic just by scanning the barcode with the mobile app (Milesight IoT Cloud) or manually entering the serial number in the web portal.< /p>
The device will pre-configure (Plug-n-play) to only connect to the Milesight LoRaWAN gateway / Milesight IoT Cloud via the serial number on a barcode. But the device can be configured via a mobile app just by placing the mobile phone against the device (NFC) or via a PC and a USB-C cable. If you want to change the settings or configure the device to fit other LoRaWAN gateways or Cloud systems, it is easily done via the mobile app (NFC).
Product sheet Milesight EM300-ZLD
Other Milesight LoRaWAN sensors and nodes
Frequency band | 868 MHz | |
Battery life | 5 years at 10 minute intervals | |
10 years at 10 minute intervals with extra battery (not included) | ||
-30 to +70 degrees | ||
Leakage: Normal / Leakage | ||
Temperature: -30 to +70 | ||
Humidity: 0 - 100% RH | ||
Power Supply | 1 x 4000 mAh ER18505 Li-SOCL | |
1 empty slot for an ER18505 Li-SOCL |