- Your shopping cart is empty!
0
Sökning:
Börja skriv för att söka!
Milesight AM319-868M LoRaWAN with 11 measurement points
Milesight AM319-868M LoRaWAN with 11 measurement points
Article no.: AM319-868M-HCHO
Delivery time: Unconfirmed
Delivery time: Unconfirmed
Milesight AM314 is a LoRaWAN device with eleven different sensors that monitors the indoor climate in the office, school, conference rooms, hospital, workshop, etc.
The device monitors temperature, humidity, air pressure, carbon dioxide, TVOC / Total Volotile Organic Compound ... read more
4 049 kr
Milesight AM314 is a LoRaWAN device with eleven different sensors that monitors the indoor climate in the office, school, conference rooms, hospital, workshop, etc.
The device monitors temperature, humidity, air pressure, carbon dioxide, TVOC / Total Volotile Organic Compound (harmful organic substances in the air), formaldehyde, Ozone, PM 2.5 and PM 10 (particles in the air), brightness, movement
The model also has an E-ink screen that presents measured values to the staff. Anyone walking past the device on the wall can see, for example, the carbon dioxide level, the humidity, the temperature or the level of harmful organic substances such as PM levels.
A face on the display presents in a very simple way whether the air quality is good , borderline or bad. You can set the levels in the unit yourself. An LED can flash red if thresholds are exceeded.
AM314 is super easy to install as it comes with Li-SOCI batteries that last 3 years (at 10 minute intervals). The unit is simply to be screwed up or pasted onto the wall with the included 3M double-adhesive plate. No wiring required.
The connection to the Milesight LoRaWAN gateway and IoT Cloud is completely automatic just by scanning the barcode with the mobile app (Milesight IoT Cloud) or manually entering the serial number in the web portal.
And if you prefer to power the device permanently, there is a USB C port on the back which is compatible with standard USB chargers.
The device will be pre-configured (Plug-n-play) to only be connected to the Milesight LoRaWAN gateway / Milesight IoT Cloud via the serial number on a barcode. But the device can be configured via a mobile app just by placing the mobile against the device (NFC). If you want to change the settings for the E-ink screen or configure the device to fit other LoRaWAN gateways or Cloud systems, you can do it easily via the mobile app.
Product sheet Milesight AM300 series
Other Milesight LoRaWAN sensors and nodes
< tr> < td valign="top"> < td valign="top"> < /tr>
| Frequency band | 868 MHz | |
| Battery life | 3 years at 10 minute intervals | |
| Temperature | -20 to + 60 degrees | |
| Measuring range | Temperature: -40 to +85 | |
| Humidity: 0-100% relative humidity | ||
| Carbon dioxide: 400-5000 ppm | ||
| Light: 0-60000 Lux (presented as level 0-5) | ||
| TVOC / Total Volotile Organic Compounds: 0-500 units< /td> | ||
| Air pressure 300-1100 hPa | ||
| Particles PM 2.5: 0-1000 µg per m3 | ||
| Particles PM 10: 0 -1000 µg per m3 | ||
| F ormaldehyde: 0-6 mg per m3 | ||
| Ozone: 0-10ppm | ||
| Power supply | 4 x Li-SOCI 2700 mAh ER14505 | |
| USB C |
The product is currently Out-of-Stock. Enter your email address below and we will notify you as soon as the product is available.
