Qubino

Qubino Smart Meter Din Rail 1 fase

Article no.: ZMNHTD1
Availability: 5st
The Qubino Smart Meter is an extremely versatile and powerful Z-Wave module for measuring energy in a single-phase electrical power network of up to 65A. A built-in microprocessor calculates e reactive energy, the power and the power factor with the measured signals. The Smart Me... read more
1 259 kr

The Qubino Smart Meter is an extremely versatile and powerful Z-Wave module for measuring energy in a single-phase electrical power network of up to 65A. A built-in microprocessor calculates e reactive energy, the power and the power factor with the measured signals. The Smart Meter is designed that it can be mounted on a DIN rail.

The Qubino Smart Meter can be used in residential, industrial and utility applications. It permanently measures the power and the current voltage directly in an AC circuit. It calculates the current and the total power, the power factor PHI and the reactive energy currently consumed. It also acts as a repeater in order to improve the range and stability of the Z-Wave network. The control via Z-Wave makes it possible to control separately available relays as well as to evaluate the measurement results of devices.

Qubino Smart Meter can automatically turn devices off after they exceed the set power consumption if you add additional contactors - IKA or BICOM.

Features:

  • Z-Wave Plus
  • Secure 2
  • EU frequency: 868.42 MHz
  • Package content: 1x Qubino Smart Meter

Main terminals (LI,NI,Lo,No):

  • Contacts capacity: 1.5...16(25)mm2
  • Connection screws: M5
  • Max torque: 3.5 Nm

Optional terminals (1,2,4,5):

  • Contact capacity: 0.05 … 1 (2.5) mm2
  • Connection screws: M3
  • Max torque: 0.6 Nm

Measuring input:

  • Type (connection): single phase (1b)
  • Reference current (Iref): 5 A
  • Maximum current (Imax): 65 A
  • Minimum current (Imin): 0.25 A
  • Starting current: 20 mA
  • Voltage (Un): 230 V (±20%)
  • Power consumption at Un: < 2 W
  • Nominal frequency (fn): 50 and 60 Hz

Write a review

What is Z-Wave Plus?

Z-Wave Plus™ is a certification developed to help users identify products that use the "new generation" also known as the "500 series" of Z-Wave hardware. Z-Wave Plus™ offers a bunch of extra functions and possibilities that improve your use and make the installation of Z-Wave devices easier.

Z-Wave has been the market leader in interoperable smart home devices since 2004. With the introduction of Next-Gen (Z-Wave 500 series) hardware, Z-Wave saw new opportunities, including longer range, longer battery life, Over The Air upgrade (OTA), more RF channels and much more. All this and they are backwards compatible with existing Z-Wave devices.

For consumers, home owners, integrators and service providers, this upgrade turned out to be very beneficial in terms of much easier installation, richer device profiles, improved self-healing and longer battery life.

Features:

  • 50% Longer battery life
  • 67% Longer range
  • 250% More Bandwidth
  • 3 F channels for improved interference protection and higher bandwidth
  • New Plug-n-Play network-wide inclusion process
  • Improved self-healing and fault tolerance with Explorer Frame function
  • Standardized method for Over the Air firmware updates (OTA)
  • Improved information for the product certification database

To be sure what is Z-Wave Plus certified, note this image above the product images on our website (Z-Wave Plus)

Kompatibilitetslistan uppdateras ganska ofta men fel kan förekomma. Hittar du något som är felaktigt så meddela oss gärna så att vi kan ändra!

Controller Status Kommentar
Aeotec Smart Home Hub Enheten fungerar helt och hållet
ZNet Lite V2 Enheten fungerar helt och hållet
Home Center HC3 Enheten fungerar helt och hållet i HC2 och HCL
Homey Enheten fungerar helt och hållet
Zipabox Enheten fungerar helt och hållet