Qubino Flush 1 Relay

Article no.: ZMNHAD1
Availability: 7st

Radio-controlled relay with one channel, Can be connected to three-wire electrical systems. The Qubino Switch can switch the connected electrical device on and off, e.g. a lamp or a wall socket (2300W resistive load). This is done either via Z-wave (smartphone/tablet)* or via the... read more

457 kr

Ord. price 609 kr

button_wishlist

Can be controlled wirelessly via e.g. Home Center 2 with associated iOS or Android application.

You can find the manual here Qubino Switch

*requires gateway e.g. Home Center

Built-in modules (Qubino Switch) are placed behind the existing switches and do not affect the appearance of the installation. To know if you can install these without running extra cables, you must first investigate if you have so-called Neutral conductor (zero) behind the switch, this is in most cases blue. The total number of cables behind the switch must be at least 3, then we do not count Earth (green/yellow).

Should you not have the Neutral conductor pulled forward, your electrician will do this without major problem.

When this is done, the installation is painless, existing switch is simply connected to the built-in module (Qubino Switch), reassemble the whole installation and put the cover on. After that you should be able to use the switch to regulate the lighting as usual, if you have installed a dimmer you can also dim with the button.

Now if we want to add the device to a Z-wave network, we can i.e. connect it to a gateway e.g. Home Center or similar. This is to achieve the function of controlling the built-in module (Qubino Switch) via the mobile alt. via a scenario. So you don't need a gateway to control it with the power switch, this can always be done, but to control the built-in module (Qubino Switch) via the phone, we need a gateway.

What is Z-Wave Plus?

Z-Wave Plus™ is a certification developed to help users identify products that use the "new generation" also known as the "500 series" of Z-Wave hardware. Z-Wave Plus™ offers a bunch of extra functions and possibilities that improve your use and make the installation of Z-Wave devices easier.

Z-Wave has been the market leader in interoperable smart home devices since 2004. With the introduction of Next-Gen (Z-Wave 500 series) hardware, Z-Wave saw new opportunities, including longer range, longer battery life, Over The Air upgrade (OTA), more RF channels and much more. All this and they are backwards compatible with existing Z-Wave devices.

For consumers, home owners, integrators and service providers, this upgrade turned out to be very beneficial in terms of much easier installation, richer device profiles, improved self-healing and longer battery life.

Features: