- Your shopping cart is empty!
0
Sökning:
Börja skriv för att söka!
Aeotec Nano Switch with Metering Gen5
Aeotec Nano Switch with Metering Gen5
With the AEOTEC Nano Switch all switchable and non-dimmable electric installations (e.g. lighting, sockets...) can be integrated into a Z-Wave network. Thus, the connected load can be switched both wirelessly via Z-Wave and locally via existing wall switch. Additionally, the ZW116 has an integrated power metering function which allows to detect the exact energy consumption of the connected load.
The compact radio module (60% smaller than its predecessor Micro Smart Switch) is placed in a wall box right behind the normal switch. The switch is no longer directly connected to the load but acts as input device for the AEOTEC insert that is controlling the load. The switch only sends control signal to the insert which controls the load then again. The solution works with all switch design. You can use a momentary or a toggle switch. It’s recommended to use wall boxes with 65mm depth. But smaller boxes with only 45mm depth can be used also if there is enough space behind the switch. The available space depends on the size of the traditional switch, the dimensions of the wall box and the amount of additional cabling placed in this box.
Features:
- Flush-mounted radio module
- Maximum load: 2,300 W
- Energy metering function
- Integrates existing installations (lighting, sockets...) into a Z-Wave network
- Works with momentary or toggle switches
- Wireless Technology: Z-Wave Plus
- Voltage: 230V, 50Hz
- Wiring: Neutral conductor required
- Power Consumption: < 0,8 W
- Dimensions: 42,5x40x20 mm
What is Z-Wave Plus?
Z-Wave Plus™ is a certification developed to help users identify products that use the "new generation" also known as the "500 series" of Z-Wave hardware. Z-Wave Plus™ offers a bunch of extra functions and possibilities that improve your use and make the installation of Z-Wave devices easier.
Z-Wave has been the market leader in interoperable smart home devices since 2004. With the introduction of Next-Gen (Z-Wave 500 series) hardware, Z-Wave saw new opportunities, including longer range, longer battery life, Over The Air upgrade (OTA), more RF channels and much more. All this and they are backwards compatible with existing Z-Wave devices.
For consumers, home owners, integrators and service providers, this upgrade turned out to be very beneficial in terms of much easier installation, richer device profiles, improved self-healing and longer battery life.
Features:
- 50% Longer battery life
- 67% Longer range
- 250% More Bandwidth
- 3 F channels for improved interference protection and higher bandwidth
- New Plug-n-Play network-wide inclusion process
- Improved self-healing and fault tolerance with Explorer Frame function
- Standardized method for Over the Air firmware updates (OTA)
- Improved information for the product certification database
To be sure what is Z-Wave Plus certified, note this image above the product images on our website (
)
Kompatibilitetslistan uppdateras ganska ofta men fel kan förekomma. Hittar du något som är felaktigt så meddela oss gärna så att vi kan ändra!
| Controller | Status | Kommentar |
|---|---|---|
| ZNet Lite V2 | Enheten fungerar helt och hållet | |
| Home Center HC3 | Enheten fungerar helt och hållet i HC2 och HCL | |
| Homey | Enheten fungerar helt och hållet | |
| Nexa | Enheten fungerar inte alls | |
| Zipabox | Enheten fungerar helt och hållet |
