Mictrack MT600 4G GPS Tracker

Article no.: MT600-E
Availability: 41st

990 kr

Available Options

With SIM card (1 year prepaid)

button_wishlist

MT600 is a GPS tracker with 4G LTE support, which means that it works even after the 2G and 3G networks are switched off. The device is connected to a web service where you can see the tracker on a map and also set alarms such as geofence or when a vehicle goes too fast according to a limit set by you. The web service is provided free of charge by Loh Electronics when you purchase the device from us. It is also possible to connect the device to independent services of your choice.

The device needs a SIM card with data to communicate. You can use any SIM card you want. It is also possible to buy a SIM card with your device, you can easily choose it in the drop-down list above.

The MT600 works not only in Sweden but also throughout Europe and large parts of the world.

Features:

4G LTE network support
Geo-fence alarm
Speed alarm
Driving log

The box includes:

MT600 4G GPS Tracker
GPS antenna
3G/4G antenna
Power cord (loose ends for fixed installation)

If you choose SIM card, we will send a SIM card together with your tracker. The amount of data is a maximum of 100MB per month. The SIM card must not be used in a device other than the MT600. The fee is paid 1 year in advance, currently SEK 299 per year.

Mått: 90(L)*70(B)*24(H)mm Vikt: 138g Spänningsmatning: 12-36vdc Backupbatteri (inbyggt): 3,7v 500mAh Frekvensområde: 4G LTE: B1/B3/B7/B8/B20/B28A 3G WCDMA : 900/2100MHz 2G: 900/1800MHz GPS känslighet: -162dBm Känslighet: 10m Arbetstemp: -20 till +60C Extern antennkontakt för GPS (SMA-hona) Extern antennkontakt för mobilnät (SMA-hona) Inbyggd 3d accelerometer Standard SIM-storlek

Explanation of frequency bands

When choosing an antenna, pay attention to which frequency bands the antenna supports. Depending on which operator and where the antenna will be used, the frequency bands vary. Larger cities use 2600MHz while smaller towns use 800/900MHz with some support bands in between such as 1800/2100MHz.

A higher frequency band gives a higher speed but also has a shorter range. The same applies to the antenna, if you have a base station that transmits on 2600MHz, your antenna, antenna cable and the location of the antenna become more important than on a lower frequency band. Explanation of signal loss we will go through soon. Higher frequency bands also mean shorter range from the base station.

450MHz (coverage band) also known as the Net1 band is the frequency band that covers the most area in Sweden. Therefore, Net1 is known to be able to have reception where other operators don´t have a chance, but with low download and upload speeds. The reason why this band is called Net1 is because that the company Net1 has exclusive rights to this frequency band.

800MHz (coverage band) is used by all common operators, excluding Net1. The low frequency band means that 800MHz covers a lot of space. Therefore, the band is used outside big cities or smaller towns. 800MHz is the most used frequency band around Europe.

900MHz (coverage band) is the band that Tele2 and Telenor initially used as coverage band. 900MHz is a more unusual LTE band and in the beginning the band caused some problems when the clients (mobile phones etc.) could not connect to 900MHz. Today, the mobile phone manufacturers have adapted the mobile phones to be able to communicate on 900MHz.

1800MHz (capacity band) is the latest frequency band launched. All operators today use this band in metropolitan centers (apart from Net1).

2600MHz (capacity band) is a very well-used frequency band all over Europe. 2600MHz is the highest frequency band used for LTE, this means that the band also has the shortest range compared to 800/900MHz. Due to the high capacity, the band is used in metropolitan environments where many base stations are required to cover as much surface as possible and have as high a capacity as possible.

Frekvensplan 4G