12v Time relay 0.1s to 999min
12v Time relay 0.1s to 999min
12v Time relay 0.1s to 999min
12v Time relay 0.1s to 999min
12v Time relay 0.1s to 999min
12v Time relay 0.1s to 999min
12v Time relay 0.1s to 999min
12v Time relay 0.1s to 999min
Drok

12v Time relay 0.1s to 999min

Article no.: 03-700
Availability: 46st
Manual
A time relay with adjustable time from 0.1sec to 999min. Setting is done easily with simple button presses and the device has an LED display where you can easily see what you are setting. 4 modes are available: 1 - Control signal causes the relay to close. When the time is ... read more
549 kr

A time relay with adjustable time from 0.1sec to 999min. Setting is done easily with simple button presses and the device has an LED display where you can easily see what you are setting.

4 modes are available:

1 - Control signal causes the relay to close. When the time is up, the relay turns off. It is possible to configure the relay to act differently if the control signal comes again:
A) If the control signal comes again, before the time is up, nothing happens
B) If the control signal comes again, before the time is up, the timer is restarted
C) If the control signal comes again, before the time is up, the relay turns off and stops counting down the timer

2 - Control signal causes the relay to start counting down at time 1. When time 1 is over, then the relay closes and counts down time2 before it shuts off again. It is possible to configure the relay to act differently if the control signal comes again:
A) If the control signal comes again, before the time is up, nothing happens
B) If the control signal comes again, before the time is up, the timer is restarted
C) If the control signal comes again, before the time is up, the relay turns off and stops counting down the timer

3 - Repeat: when time 1 is over, the relay closes and starts counting down time 2 and then turn off and start counting time 1 again.

4 - Control signal causes the relay to close. When the control signal disappears, the relay starts counting down the time. When the time is up, the relay turns off. If the control signal returns before the time is up, the time is reset and starts counting down again when the control signal disappears.

 

Usage example
If you have a router in the car, or other device that draws power, but you want it to be on for an hour or so after the ignition is turned off. Then use mode 4 with a countdown timer to keep power in your equipment for a while after you turn off the ignition.

 

Write a review